Example for using TubULAR after making an ImSAnE experiment instance#
Here we define an ImSAnE instance and pass it to tubular as an argument, so any methods of the Experiment Class instance xp are still endowed to tubi.xp.
%% EXAMPLE MASTER PIPELINE FOR TIME SERIES DATA (3D + time)
% by NPMitchell & Dillon Cislo
% This is a pipeline to analyze dynamic tube-like surfaces in 3D data.
% A tube-like surface is one that is either cylindrical in topology or
% elongated and spherical in topology. If the initial mesh is a spherical
% topology, then two 'endcaps' will be truncated in order to transform it
% to a cylindrical topology.
%% Clear workspace ========================================================
% We start by clearing the memory and closing all figures
clear; close all; clc;
% cd /mnt/data/organoids/tube/
% cd /mnt/data/code/tubular/example/ ;
cd /mnt/data/tubular_test/fly_midgut/ ;
dataDir = cd ;
%% ADD PATHS TO THIS ENVIRONMENT ==========================================
origpath = matlab.desktop.editor.getActiveFilename;
cd(fileparts(origpath))
addpath(fileparts(origpath))
addpath(fullfile('utility', 'addpath_recurse'))
addpath_recurse('utility')
addpath_recurse('/mnt/data/code/gptoolbox')
addpath('TexturePatch')
addpath('DEC')
addpath(fullfile('utility','plotting'))
addpath(fullfile('utility','plotting'))
% go back to the data
cd(dataDir)
%% DEFINE NEW MASTER SETTINGS
if ~exist('./masterSettings.mat', 'file')
% Metadata about the experiment
stackResolution = [.2619 .2619 .2619] ; % resolution in spaceUnits per pixel
nChannels = 1 ; % how many channels is the data (ex 2 for GFP + RFP)
channelsUsed = 1 ; % which channels are used for analysis
timePoints = 123:124; % timepoints to include in the analysis
ssfactor = 4 ; % subsampling factor
flipy = false ; % whether the data is stored inverted relative to real position in lab frame
timeInterval = 1 ; % physical interval between timepoints
timeUnits = 'min' ; % physical unit of time between timepoints
spaceUnits = '$\mu$m' ; % physical unit of time between timepoints
fn = 'Time_%06d_c1_stab'; % filename string pattern
set_preilastikaxisorder = 'xyzc' ; % data axis order for subsampled h5 data (ilastik input)
swapZT = 1 ; % whether to swap the z and t dimensions
masterSettings = struct('stackResolution', stackResolution, ...
'nChannels', nChannels, ...
'channelsUsed', channelsUsed, ...
'timePoints', timePoints, ...
'ssfactor', ssfactor, ...
'flipy', flipy, ...
'timeInterval', timeInterval, ...
'timeUnits', timeUnits, ...
'spaceUnits', spaceUnits, ...
'fn', fn,...
'swapZT', swapZT, ...
'set_preilastikaxisorder', set_preilastikaxisorder, ...
'nU', 100, ...
'nV', 100);
disp('Saving masterSettings to ./masterSettings.mat')
if exist('./masterSettings.mat', 'file')
ui = input('This will overwrite the masterSettings. Proceed (Y/n)?', 's') ;
if ~isempty(ui) && (strcmp(ui(1), 'Y') || strcmp(ui(1), 'y'))
save('./masterSettings.mat', 'masterSettings')
loadMaster = false ;
else
disp('Loading masterSettings from disk instead of overwriting')
loadMaster = true ;
end
else
save('./masterSettings.mat', 'masterSettings')
loadMaster = false ;
end
else
loadMaster = true ;
end
if loadMaster
% LOAD EXISTING MASTER SETTINGS
disp('Loading masterSettings from ./masterSettings.mat')
load('./masterSettings.mat', 'masterSettings')
% Unpack existing master settings
stackResolution = masterSettings.stackResolution ;
nChannels = masterSettings.nChannels ;
channelsUsed = masterSettings.channelsUsed ;
timePoints = masterSettings.timePoints ;
ssfactor = masterSettings.ssfactor ;
% whether the data is stored inverted relative to real position
flipy = masterSettings.flipy ;
timeInterval = masterSettings.timeInterval ; % physical interval between timepoints
timeUnits = masterSettings.timeUnits ; % physical unit of time between timepoints
spaceUnits = masterSettings.spaceUnits ; % unit of distance of full resolution data pixels ('$\mu$m')
fn = masterSettings.fn ;
set_preilastikaxisorder = masterSettings.set_preilastikaxisorder ;
swapZT = masterSettings.swapZT ;
nU = masterSettings.nU ;
nV = masterSettings.nV ;
end
dir16bit = fullfile(dataDir) ;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% PART 1: Surface detection using ImSAnE's integral detector
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% I. INITIALIZE ImSAnE PROJECT ===========================================
% Setup a working directory for the project, where extracted surfaces,
% metadata and debugging output will be stored. Also specifiy the
% directory containing the data.
cd(dir16bit)
dataDir = cd ;
projectDir = dataDir ;
% [ projectDir, ~, ~ ] = fileparts(matlab.desktop.editor.getActiveFilename);
cd(projectDir);
if projectDir(end) ~= '/'
projectDir = [projectDir '/'];
end
% Start by creating an experiment object, optionally pass on the project
% directory (otherwise it will ask), and change into the directory of the
% data. This serves as a front-end for data loading, detection, fitting
% etc.
xp = project.Experiment(projectDir, dataDir);
% Set file and experiment meta data
%
% We assume on individual image stack for each time point, labeled by time.
% To be able to load the stack, we need to tell the project wehre the data
% is, what convention is assumed for the file names, available time
% points, and the stack resolution. Options for modules in ImSAnE are
% organized in MATLAB structures, i.e a pair of field names and values are
% provided for each option.
%
% The following file metadata information is required:
% * 'directory' , the project directory (full path)
% * 'dataDir' , the data directory (full path)
% * 'filenameFormat' , fprintf type format spec of file name
% * 'timePoints' , list of itmes available stored as a vector
% * 'stackResolution' , stack resolution in microns, e.g. [0.25 0.25 1]
%
% The following file metadata information is optional:
% * 'imageSpace' , bit depth of image, such as uint16 etc., defined
% in Stack class
% * 'stackSize' , size of stack in pixels per dimension
% [xSize ySize zSize]
% * 'swapZT' , set=1 if time is 3rd dimension and z is 4th
% A filename base template - to be used throughout this script
fileMeta = struct();
fileMeta.dataDir = dataDir;
fileMeta.filenameFormat = [fn, '.tif'];
fileMeta.nChannels = nChannels;
fileMeta.timePoints = timePoints ;
fileMeta.stackResolution = stackResolution;
fileMeta.swapZT = masterSettings.swapZT;
% Set required additional information on the experiment. A verbal data set
% description, Jitter correct by translating the sample, which time point
% to use for fitting, etc.
%
% The following project metadata information is required:
% * 'channelsUsed' , the channels used, e.g. [1 3] for RGB
% * 'channelColor' , mapping from element in channels used to RGB = 123
% * 'dynamicSurface' , Not implemented yet, future plan: boolean, false: static surface
% * 'detectorType' , name of detector class, e.g. radielEdgeDetector
% ,(user threshholded), fastCylinderDetector
% * 'fitterType' , name of fitter class
%
% The following project meta data information is optional:
% * 'description' , string describing the data set set experiments metadata,
% such as a description, and if the surface is dynamic,
% or requires drift correction of the sample.
% * 'jitterCorrection', Boolean, false: No fft based jitter correction
% first_tp is also required, which sets the tp to do individually.
first_tp = 1 ;
expMeta = struct();
expMeta.channelsUsed = channelsUsed ;
expMeta.channelColor = 1;
expMeta.description = 'Drosophila gut';
expMeta.dynamicSurface = 1;
expMeta.jitterCorrection = 0; % 1: Correct for sample translation
expMeta.fitTime = fileMeta.timePoints(first_tp);
expMeta.detectorType = 'surfaceDetection.integralDetector';
expMeta.fitterType = 'surfaceFitting.meshWrapper';
% Now set the meta data in the experiment.
xp.setFileMeta(fileMeta);
xp.setExpMeta(expMeta);
xp.initNew();
clear fileMeta expMeta
%% LOAD THE FIRST TIME POINT ==============================================
xp.setTime(xp.fileMeta.timePoints(1)) ;
% xp.loadTime(xp.fileMeta.timePoints(first_tp));
% xp.rescaleStackToUnitAspect();
%% SET DETECTION OPTIONS ==================================================
% Load/define the surface detection parameters
msls_detOpts_fn = fullfile(projectDir, 'msls_detectOpts.mat') ;
if exist(msls_detOpts_fn, 'file')
load(msls_detOpts_fn, 'detectOptions')
else
outputfilename_ply='mesh_ms_' ;
outputfilename_ls='msls_' ;
outputfilename_smoothply = 'mesh_' ;
ms_scriptDir='/mnt/data/code/morphsnakes_wrapper/morphsnakes_wrapper/' ;
init_ls_fn = 'msls_initguess' ;
meshlabCodeDir = '/mnt/data/code/meshlab_codes/';
mlxprogram = fullfile(meshlabCodeDir, ...
'laplace_surface_rm_resample30k_reconstruct_LS3_1p2pc_ssfactor4.mlx') ;
prob_searchstr = '_stab_Probabilities.h5' ;
preilastikaxisorder = set_preilastikaxisorder; ... % axis order in input to ilastik as h5s. To keep as saved coords use xyzc
ilastikaxisorder= 'cxyz'; ... % axis order as output by ilastik probabilities h5
imsaneaxisorder = 'xyzc'; ... % axis order relative to mesh axis order by which to process the point cloud prediction. To keep as mesh coords, use xyzc
% Name the output mesh directory --------------------------------------
mslsDir = [fullfile(projectDir, 'msls_output') filesep];
% Surface detection parameters ----------------------------------------
detectOptions = struct( 'channel', 1, ...
'ssfactor', 4, ...
'niter', 35,...
'niter0', 160, ...
'lambda1', 1, ...
'lambda2', 1, ...
'pressure', 0, ...
'tension', 0.5, ...
'pre_pressure', -5, ...
'pre_tension', 0, ...
'post_pressure', 2, ...
'post_tension', 3, ...
'exit_thres', 1e-7, ...
'foreGroundChannel', 1, ...
'fileName', sprintf( fn, xp.currentTime ), ...
'mslsDir', mslsDir, ...
'ofn_ls', outputfilename_ls, ...
'ofn_ply', outputfilename_ply,...
'ms_scriptDir', ms_scriptDir, ...
'timepoint', xp.currentTime, ...
'zdim', 2, ...
'ofn_smoothply', outputfilename_smoothply, ...
'mlxprogram', mlxprogram, ...
'init_ls_fn', init_ls_fn, ... % set to none to load prev tp
'run_full_dataset', projectDir,... % projectDir, ... % set to 'none' for single tp
'radius_guess', 40, ...
'dset_name', 'exported_data',...
'center_guess', '200,75,75',... % xyz of the initial guess sphere ;
'save', true, ... % whether to save images of debugging output
'plot_mesh3d', false, ...
'dtype', 'h5',...
'mask', 'none',...
'mesh_from_pointcloud', false, ...
'prob_searchstr', prob_searchstr, ...
'preilastikaxisorder', preilastikaxisorder, ...
'ilastikaxisorder', ilastikaxisorder, ...
'physicalaxisorder', imsaneaxisorder, ...
'include_boundary_faces', true, ...
'smooth_with_matlab', -1, ... % set this to >0 to use matlab laplacian filter instead of meshlab
'pythonVersion', '2') ;
% save options
if exist(msls_detOpts_fn, 'file')
disp('Overwriting detectOptions --> renaming existing as backup')
backupfn1 = [msls_detOpts_fn '_backup1'] ;
if exist(backupfn1, 'file')
backupfn2 = [msls_detOpts_fn '_backup2'] ;
system(['mv ' backupfn1 ' ' backupfn2])
end
system(['mv ' msls_detOpts_fn ' ' backupfn1])
end
disp('Saving detect Options to disk')
save(msls_detOpts_fn, 'detectOptions') ;
end
% Overwrite certain parameters for script structure
detectOptions.fileName = sprintf( fn, xp.currentTime ) ;
mslsDir = detectOptions.mslsDir ;
% Set detect options ------------------------------------------------------
xp.setDetectOptions( detectOptions );
disp('done')
%% CREATE THE SUBSAMPLED H5 FILE FOR INPUT TO ILASTIK =====================
for tt = xp.fileMeta.timePoints
if ~exist(fullfile(projectDir, [sprintf(fn, tt) '.h5']), 'file')
disp(['Did not find file: ', fullfile(projectDir, [sprintf(fn, tt) '.h5'])])
xp.loadTime(tt);
xp.rescaleStackToUnitAspect();
% make a copy of the detectOptions and change the fileName
detectOpts2 = detectOptions ;
detectOpts2.fileName = sprintf( fn, xp.currentTime ) ;
xp.setDetectOptions( detectOpts2 );
xp.detector.prepareIlastik(xp.stack);
disp(['done outputting downsampled data h5: tp=' num2str(tt) ' for surface detection'])
else
disp(['h5 ' num2str(tt) ' was already output, skipping...'])
end
end
disp('Open with ilastik if not already done')
%% TRAIN NON-STABILIZED DATA IN ILASTIK TO IDENTIFY SURFACE ==============
% Open ilastik, train on h5s until probabilities and uncertainty are
% satisfactory for extracting a mesh. For example, here we train on the
% membrane (channel 1) and the yolk (channel 2), so that a level set will
% enclose the yolk but not escape through the membrane.
%% Create MorphSnakes LevelSets from the Probabilities output of ilastik ==
% Now detect all surfaces
if strcmp(detectOptions.run_full_dataset, projectDir)
disp('Running dataset mode, in which all surfaces are extracted serially using morphsnakes')
xp.setTime(xp.fileMeta.timePoints(1));
detectOpts2 = detectOptions ;
detectOpts2.fileName = sprintf( fn, xp.currentTime ) ;
xp.setDetectOptions( detectOpts2 );
xp.detectSurface();
else
% Use morphsnakes to extract surfaces for all timepoints INDIVIDUALLY
assert(strcmp(detectOptions.run_full_dataset, 'none'))
for tp = xp.fileMeta.timePoints
xp.setTime(tp);
% make a copy of the detectOptions and change the fileName
detectOpts2 = detectOptions ;
detectOpts2.timepoint = xp.currentTime ;
detectOpts2.fileName = sprintf( fn, xp.currentTime );
xp.setDetectOptions( detectOpts2 );
xp.detectSurface();
% For next time, use the output mesh as an initial mesh, which will
% be searched for if init_ls_fn is set to 'none'.
detectOpts2.init_ls_fn = 'none' ;
end
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% PART 2: TubULAR -- surface parameterization
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Now we have 3d data volumes and surfaces. Define a TubULAR object.
% To visualize data on these surfaces and compute how these surfaces deform
% we now define TubULAR object.
nU = masterSettings.nU ;
nV = masterSettings.nV ;
opts.meshDir = mslsDir ; % Directory where meshes reside
opts.flipy = flipy ; % Set to true if data volume axes are inverted in chirality wrt physical lab coordinates
opts.timeInterval = timeInterval ; % Spacing between adjacent timepoints in units of timeUnits
opts.timeUnits = timeUnits ; % units of time, so that adjacent timepoints are timeUnits * timeInterval apart
opts.spaceUnits = spaceUnits ; % Units of space in LaTeX, for ex '$mu$m' for micron
opts.nU = nU ; % How many points along the longitudinal axis to sample surface
opts.nV = nV ; % How many points along the circumferential axis to sample surface
opts.t0 = xp.fileMeta.timePoints(1) ; % reference timepoint used to define surface-Lagrangian and Lagrangian measurements
opts.normalShift = 10 ; % Additional dilation acting on surface for texture mapping
opts.a_fixed = 2.0 ; % Fixed aspect ratio of pullback images. Setting to 1.0 is most conformal mapping option.
opts.adjustlow = 1.00 ; % floor for intensity adjustment
opts.adjusthigh = 99.9 ; % ceil for intensity adjustment (clip)
opts.phiMethod = 'curves3d' ; % Method for following surface in surface-Lagrangian mapping [(s,phi) coordinates]
opts.lambda_mesh = 0.00 ; % Smoothing applied to the mesh before DEC measurements
opts.lambda = 0.0 ; % Smoothing applied to computed values on the surface
opts.lambda_err = 0.0 ; % Additional smoothing parameter, optional
disp('defining TubULAR class instance (tubi= tubular instance)')
tubi = TubULAR(xp, opts) ;
disp('done defining TubULAR instance')
%% Inspect all meshes in 3D
for tp = xp.fileMeta.timePoints
% Load the mesh
meshfn = sprintf( tubi.fullFileBase.mesh, tp ) ;
mesh = read_ply_mod(meshfn) ;
% Plot the mesh in 3d. Color here by Y coordinate
trisurf(mesh.f, mesh.v(:, 1), mesh.v(:, 2), mesh.v(:, 3), ...
mesh.v(:, 3), 'edgecolor', 'none', 'Facealpha', 0.5)
title(['t=' num2str(tp)])
axis equal
view(2)
pause(0.1)
end
%% Obtain APDV coordinates of the surface.
% There are two options for obtaining these coordinates.
% 1. Automatically determine A and P by the extremal points of the
% surface mesh along the elongated axis of the mesh, and define DV as
% pointing perpendicular to this.
% 2. Train in iLastik for an anterior spot in 3d (A), a posterior spot in
% 3d (P), and a spot which is dorsal to the line connecting A and P. Any
% dorsal point is fine, as long as it points dorsal to the AP axis
% defined by A and P. See picture below.
%
% example:
% D
% |
% |
% A -----------------P
%
% Here we use option 2. We must prepare APDV ilastik training first outside
% MATLAB.
% Train on anterior (A), posterior (P), background (B), and
% dorsal anterior (D) location in different iLastik channels by having a
% blob centered on a point that you wish to identify as each label (in 3D).
% anteriorChannel, posteriorChannel, and dorsalChannel specify the iLastik
% training channel that is used for each specification.
% Name the h5 file output from iLastik as ..._Probabilities_apcenterline.h5
% Training for dorsal (D) is only needed at the reference time point, t0,
% because that's the only one that's used.
%
% A dorsal blob for the gut is marked at the site where the gut closes,
% with 48YGAL4-expressing cells form a seam.
% Posterior is at the rear of the yolk, where the endoderm closes, for
% apical surface training.
% Anterior is at the junction of the midgut with the foregut.
%% Define global orientation frame (for viewing in canonical frame)
% Compute APDV coordinate system
alignAPDVOpts = struct() ;
alignAPDVOpts.overwrite = false ;
tubi.computeAPDVCoords(alignAPDVOpts) ;
%% Select the endcaps for the centerline computation (A and P) and a point
% along which we will form a branch cut for mapping to the plane (D).
apdvOpts = struct() ;
apdvOpts.overwrite = false ;
[apts_sm, ppts_sm] = tubi.computeAPDpoints(apdvOpts) ;
%% Align the meshes in the APDV global frame & plot them
tubi.alignMeshesAPDV(alignAPDVOpts) ;
disp('done')
%% PLOT ALL TEXTURED MESHES IN 3D (OPTIONAL: this is SLOW) ================
% Establish texture patch options
metadat = struct() ;
metadat.reorient_faces = false ; % set to true if some mesh normals may be inverted (requires gptoolbox if true)
metadat.normal_shift = tubi.normalShift ; % normal push, in pixels, along normals defined in data XYZ space
metadat.texture_axis_order = [1 2 3] ; % texture space sampling. If the surface and dataspace have axis permutation, enter that here
Options.PSize = 5 ; % Psize is the linear dimension of the grid drawn on each triangular face. Set PSize > 1 for refinement of texture on each triangle of the surface triangulation. Higher numbers are slower but give more detailed images.
Options.numLayers = [0, 0]; % how many layers to MIP over/bundle into stack, as [outward, inward]
Options.layerSpacing = 2 ; % Distance between layers over which we take MIP, in pixels,
% Plot on surface for all timepoints
tubi.plotSeriesOnSurfaceTexturePatch(metadat, Options)
%% EXTRACT CENTERLINES
% Note: these just need to be 'reasonable' centerlines for topological
% checks on the orbifold cuts. Therefore, use as large a resolution ('res')
% as possible that still forms a centerline passing through the mesh
% surface, since the centerline computed here is just for constraining the
% mapping to the plane.
cntrlineOpts.overwrite = false ; % overwrite previous results
cntrlineOpts.overwrite_ims = false ; % overwrite previous results
cntrlineOpts.weight = 0.1; % for speedup of centerline extraction. Larger is less precise
cntrlineOpts.exponent = 1.0 ; % how heavily to scale distance transform for speed through voxel
cntrlineOpts.res = 4.0 ; % resolution of distance tranform grid in which to compute centerlines
cntrlineOpts.preview = false ; % preview intermediate results
cntrlineOpts.reorient_faces = false ; % not needed for our well-constructed meshes
cntrlineOpts.dilation = 0 ; % how many voxels to dilate the segmentation inside/outside before path computation
% Note: this can take about 400s per timepoint for res=2.0, so use as big a
% res value as possible.
%
tubi.extractCenterlineSeries(cntrlineOpts)
disp('done with centerlines')
%% Identify anomalies in centerline data
idOptions.ssr_thres = 15 ; % distance of sum squared residuals in um as threshold for removing spurious centerlines
tubi.generateCleanCntrlines(idOptions) ;
disp('done with cleaning up centerlines')
%% Cylinder cut mesh --> transforms a topological sphere into a topological cylinder
% Look for options on disk. If not saved, define options.
if ~exist(tubi.fileName.endcapOptions, 'file')
endcapOpts = struct( 'adist_thres', 20, ... % 20, distance threshold for cutting off anterior in pix
'pdist_thres', 14, ... % 15-20, distance threshold for cutting off posterior in pix
'tref', tubi.t0) ; % reference timepoint at which time dorsal-most endcap vertices are defined
tubi.setEndcapOptions(endcapOpts) ;
% Save the options to disk
tubi.saveEndcapOptions() ;
else
% load endcapOpts
tubi.loadEndcapOptions() ;
endcapOpts = tubi.endcapOptions ;
end
methodOpts.overwrite = true ;
methodOpts.save_figs = true ; % save images of cutMeshes along the way
methodOpts.preview = false ; % display intermediate results
tubi.sliceMeshEndcaps(endcapOpts, methodOpts) ;
%% Clean Cylinder Meshes
% This removes "ears" from the endcaps of the tubular meshes (cylindrical
% meshes)
cleanCylOptions = struct() ;
cleanCylOptions.overwrite = false ;
tubi.cleanCylMeshes(cleanCylOptions)
disp('done cleaning cylinder meshes')
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% ORBIFOLD -> begin populating tubi.dir.mesh/gridCoords_nUXXXX_nVXXXX/
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
overwrite = true ;
% Iterate Through Time Points to Create Pullbacks ========================
for tt = tubi.xp.fileMeta.timePoints
disp(['NOW PROCESSING TIME POINT ', num2str(tt)]);
tidx = xp.tIdx(tt);
% Load the data for the current time point ------------------------
tubi.setTime(tt) ;
%----------------------------------------------------------------------
% Create the Cut Mesh
%----------------------------------------------------------------------
cutMeshfn = sprintf(tubi.fullFileBase.cutMesh, tt) ;
cutPathfn = sprintf(tubi.fullFileBase.cutPath, tt) ;
if ~exist(cutMeshfn, 'file') || ~exist(cutPathfn, 'file') || overwrite
if exist(cutMeshfn, 'file')
disp('Overwriting cutMesh...') ;
else
disp('cutMesh not found on disk. Generating cutMesh... ');
end
options = struct() ;
tubi.generateCurrentCutMesh(options)
disp('Saving cutP image')
% Plot the cutPath (cutP) in 3D
tubi.plotCutPath(tubi.currentMesh.cutMesh, tubi.currentMesh.cutPath)
compute_pullback = true ;
else
fprintf('Loading Cut Mesh from disk... ');
tubi.loadCurrentCutMesh()
compute_pullback = ~isempty(tubi.currentMesh.cutPath) ;
end
spcutMeshOptions = struct() ;
spcutMeshOptions.t0_for_phi0 = tubi.t0set() ; % which timepoint do we define corners of pullback map
spcutMeshOptions.save_phi0patch = false ;
spcutMeshOptions.iterative_phi0 = false ;
spcutMeshOptions.smoothingMethod = 'none' ;
tubi.plotting.preview = false ;
tubi.generateCurrentSPCutMesh([], spcutMeshOptions) ;
% Compute the pullback if the cutMesh is ok
if compute_pullback || ~exist(sprintf(tubi.fullFileBase.im_sp, tt), 'file')
pbOptions = struct() ;
tubi.generateCurrentPullbacks([], [], [], pbOptions) ;
else
disp('Skipping computation of pullback')
end
end
disp('Done with generating spcutMeshes and cutMeshes')
%% Inspect coordinate system charts using (s,phi) coordinate system ('sp')
options = struct() ;
options.coordSys = 'sp' ;
tubi.coordSystemDemo(options)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% PART 3: Further refinement of dynamic meshes
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Smooth the sphi grid meshes in time ====================================
options = struct() ;
options.overwrite = overwrite ;
options.width = 4 ; % width of kernel, in #timepoints, to use in smoothing meshes
tubi.smoothDynamicSPhiMeshes(options) ;
%% Plot the time-smoothed meshes
tubi.plotSPCutMeshSmRS(options) ;
% Inspect coordinate system charts using smoothed meshes
options = struct() ;
options.coordSys = 'spsm' ;
tubi.coordSystemDemo(options)
%% Redo Pullbacks with time-smoothed meshes ===============================
disp('Create pullback using S,Phi coords with time-averaged Meshes')
for tt = tubi.xp.fileMeta.timePoints
disp(['NOW PROCESSING TIME POINT ', num2str(tt)]);
tidx = tubi.xp.tIdx(tt);
% Load the data for the current time point ------------------------
tubi.setTime(tt) ;
% Establish custom Options for MIP --> choose which pullbacks to use
pbOptions = struct() ;
pbOptions.numLayers = [0 0] ; % how many onion layers over which to take MIP
pbOptions.generate_spsm = true ;
pbOptions.generate_sp = false ;
pbOptions.overwrite = false ;
tubi.generateCurrentPullbacks([], [], [], pbOptions) ;
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Part 4: Computation of tissue deformation, with in-plane and out-of-plane flow
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% TILE/EXTEND SMOOTHED IMAGES IN Y AND RESAVE ============================
% Skip if already done
options = struct() ;
options.coordsys = 'spsm' ;
tubi.doubleCoverPullbackImages(options)
disp('done')
%% PERFORM PIV ON PULLBACK MIPS ===========================================
% % Compute PIV either with built-in phase correlation or in PIVLab
options = struct() ;
options.overwrite = true ;
tubi.measurePIV2d(options) ;
%% Measure velocities =====================================================
disp('Making map from pixel to xyz to compute velocities in 3d for smoothed meshes...')
options = struct() ;
options.show_v3d_on_data = false ;
tubi.measurePIV3d(options) ;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Lagrangian dynamics
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Pullback pathline time averaging of velocities
options = struct() ;
tubi.timeAverageVelocities(options)
% Velocity plots for pathline time averaging
options.plot_vxyz = false ;
options.invertImage = true ;
options.averagingStyle = 'Lagrangian';
tubi.plotTimeAvgVelocities(options)
% Divergence and Curl (Helmholtz-Hodge) for Lagrangian
options = struct() ;
options.averagingStyle = 'Lagrangian' ;
options.lambda = 0 ;
options.lambda_mesh = 0 ;
tubi.helmholtzHodge(options) ;
% Compressibility & kinematics for Lagrangian
options = struct() ;
tubi.measureMetricKinematics(options)
%% Metric Kinematics Kymographs & Correlations -- Bandwidth Filtered
options = struct() ;
tubi.plotMetricKinematics(options)
%% Pullback pathlines connecting Lagrangian grids
options = struct() ;
tubi.measurePullbackPathlines(options)
%% Query velocities along pathlines
options = struct() ;
tubi.measurePathlineVelocities(options)
% plot the pathline velocities
options = struct() ;
options.gridTopology = 'triangulated' ;
tubi.plotPathlineVelocities(options)
% Measure Pathline Kinematics
options = struct() ;
tubi.measurePathlineMetricKinematics(options)
% Plot Pathline Kinematics
options = struct() ;
tubi.plotPathlineMetricKinematics(options)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Create ricci mesh at t0 to measure Beltrami coefficient in pathlines
options = struct() ;
options.climit = 1 ;
options.coordSys = 'ricci' ;
tubi.measureBeltramiCoefficient(options) ;
%% Strain rate (epsilon = 1/2 (djvi+divj) -vn bij)
options = struct() ;
tubi.measureStrainRate(options)
%% Plot time-averaged strain rates in 3d on mesh
options = struct() ;
tubi.plotStrainRate3DFiltered(options)
%% Kymograph strain rates
options = struct() ;
options.clim_trace = 0.05 ;
options.clim_deviatoric = 0.05 ;
tubi.plotStrainRate(options)
% Measure strain rate along pathlines
options = struct() ;
options.overwriteImages = false ;
options.plot_dzdp = false ;
tubi.measurePathlineStrainRate(options)
%% Measure divergence and out-of-plane deformation along pathlines
tubi.measurePathlineMetricKinematics()
% Pathline strain rate plots
options = struct() ;
options.climit = 0.05 ;
options.climitWide = 1.0 ;
tubi.plotPathlineStrainRate(options)
%% Measure strain along pathlines -- note this is from pathlines, not integrating rates
options = struct() ;
options.plot_dzdp = false ;
options.climitInitial = 0.05 ;
options.climitRamp = 0.01 ;
options.climitRatio = 1 ;
tubi.measurePathlineStrain(options)
tubi.plotPathlineStrain(options)